Sony FWD-S46H2 Bedienungsanleitung Seite 60

Parts
1 Mounting bracket
installation holes
2 Speaker installation holes
3 Tabletop stand installation
holes
4 1 (POWER) button
5 INPUT/ (ENTER)
button
6 +/–/F/f (volume/menu
item selection) button
7 MENU/ (RETURN)
button
12
GB
Description
Screw holes conforming to VESA standard. (Pitch: 400mm × 400mm)
Note
Use screws with the proper thread and length, and tighten to the proper torque.
Diameter of thread: M6
Thread length: 10 mm
Torque: 20 kgf·cm
For attaching the speakers SS-SPG02 (not supplied).
For attaching the tabletop stand SU-S02 (not supplied).
Switches the display on or off (standby).
Operate when the main power switch is "ON" ( side).
Press to select a signal to be input from the INPUT or OPTION connector.
The signal to be input switches as follows each time you press the INPUT button.
Video Component
When an optional adaptor supporting the video signal is not installed in the OPTION slot,
OPTION will be skipped.
Press to set your choice.
Press to control speaker volume. When the menu is displayed, press to select the menu
item or set a value.
Press to set your choice.
Press to show menus.
This returns to the preceding menu screen.
HD15 DVI HDMI OPTION