Maintenance And Care; Disposal Information; Spare Parts And Accessories - Flex MS 1706 FR Bedienungsanleitung

Wall chaser MS 1706 FR
n Short cuts in abrasive materials, e.g. the
sharpening stone for diamond tools in
the range of accessories, sharpen the
cutting disc.
n If this does not improve the cutting
performance, replace the cutting discs.
For further information on the
manufacturer's products go to
www.flex-tools.de.

Maintenance and care

Danger!
Before performing any work on the wall
chaser, pull out the mains plug.
Cleaning
Regularly clean the power tool and
ventilation slots. Frequency of cleaning is
dependent on the material and duration of
use.
Regularly blow out the housing interior and
motor with dry compressed air.
Note!
Do not open the wall chaser during the
warranty period. Non-compliance will deem
the guarantee obligations of the
manufacturer null and void.
Repairs
Repairs may be carried out by an authorised
customer service centre only.

Spare parts and accessories

Spare-part/Accessory
1 adapter 32/28 mm for suction
hose
Universal adapter 25–32 mm
Other accessories can be found in the
manufacturer's catalogues.
Downloaded from www.Manualslib.com
Order
no.
251.847
259.827
manuals search engine
Diamond cutting discs
Dimensions
[mm]
For masonry and render with additional
lateral diamond segments to protect the
steel core
1 items per unit Ø 140
For tiles and ceramic bonded materials to
ensure very precise, sharp-edged channels
1 items per unit Ø 140
For rapid cutting of masonry, limestone and
concrete. Especially hard with large gaps
between segments for improved cooling and
optimum dust extraction
1 items per unit Ø 140
Sharpening stone for diamond tools
1 items per unit 320x160x30

Disposal information

Danger!
Render redundant power tools unusable by
removing the power cord.
EU countries only
Do not throw electric power tools
into the household waste!
In accordance with the European Directive
2002/96/EG on Waste Electrical and
Electronic Equipment and transposition into
national law used electric power tools must
be collected separately and recycled in an
environmentally friendly manner.
Note!
Please ask your dealer about disposal
options!
Order no.
253.120
252.290
303.593
251.756
21