Supplied Components; Important Safety Information - Flex MS 1706 FR Bedienungsanleitung

Wall chaser MS 1706 FR

Supplied components

Wall chaser MS 1706 FR
2 diamond cutting discs (part no.: 303.593)
1 SDS-Clic quick-release clamping nut
(part no.: 253.049)
2 clamping flanges (part no.: 191.612)
5 distance washers 5 mm
(part no.: 318.914)
1 adapter for dust extractor 32/28 mm
(part no.: 327.026)
1 web remover (part no.: 229.253)
1 Plastic carrying case
(part no.: 327.034)
1 operating manual (part no. 318.779)

Important safety information

Danger!
Before using the wall chaser, please read
and follow:
– these operating instructions,
– the "General safety instructions" on the
handling of power tools in the enclosed
booklet (leaflet-no. 315.915/04.04),
– the currently valid site rules and the
regulations for the prevention of
accidents.
This wall chaser is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The wall chaser
may be operated only if it is
– used as intended,
– in perfect working order.
Faults which impair safety must be repaired
immediately.
Downloaded from www.Manualslib.com manuals search engine
Noise
Caution
Wear ear protection at a sound pressure
above 85 dB(A).
Measured according to EN 50144:
:
Sound pressure
L [dB(A)]
pA
MS 1706 FR 86
Vibration
Weighted effective value of acceleration
according to EN 50144: 2.5 m/s²
Intended use
This wall chaser is designed
– is designed for industrial applications,
– for chasing and separating mineral
materials without the addition of water
– for use with diamond cutting discs and
accessories which are indicated in this
manual or recommended by the
manufacturer.
Safety instructions
Danger!
n When using the power tool,
wear protective equipment:
Dust mask, goggles, ear protection,
protective gloves, sturdy shoes.
n Switch on the wall chaser before guiding
it towards the workpiece.
n Do not load the wall chaser to such an
extent that it comes to a standstill.
n When working, guide the wall chaser
with both hands. Ensure that you have
a secure footing.
n Never clamp the wall chaser in a vice.
n Before plugging in the power cord (11),
ensure that the machine is switched off.
Sound power
L [dB(A)]
WA
97
15