Oil / Changing Oil; Oil Capacity - Texas POWERLINE TG 620 Bedienungsanleitung

6. Oil / changing oil



See fig. 5.
Change the oil according to the specifications of the machine.
1. Let the engine run 5 minutes, so the engine is hot.
2. Unscrew the drain plug (Fig 6.1) and let the warm oil run out of the engine.
3. Attach the drain plug and fasten.
Refilling oil (Fig 5)
1. Remove the oil filler cap
2. Refill the oil to the edge of the filling hole (see capacity above)
Please dispose the used engine oil environmentally correct. We suggest that you keep the used
oil in a sealed container and dispose at your recycling center or service station for reclamation. Do
Downloaded from www.Manualslib.com
TG620 / TG720
Use the correct oil for the specific time of year.
Always check the oil level when the engine is placed in a horizontal position.
Always check the oil level visible and to edge of fill hole
TG620 / TG720
Warm oil liquefies, which makes it easier to drain the oil.
Remember to keep an appropriate container ready.
Important: Before changing oil, ensure that the engine is level position.
Important: By the right amount oil the oil MUST be visible and to edge of fill hole
not throw it in the waste; pour it on the ground; or down a drain.
manuals search engine
OIL
SAE 30 or 10W-40
SAE 30 Art.no 90306506

OIL CAPACITY

CHANGING OIL
12
3,6 Litre / 3,6 Litre
0.6 Litre / 0.6 Litre