Fuel; Oil / Changing Oil; Oil Capacity - Texas LC 165 Bedienungsanleitung

5. Fuel

Only use unleaded fuel octane 95 on your engine.
Don't overfill the capacity of the fuel tank The indicator on the tank shows how much fuel is left
See fig 4.
LC165 - LC170 / LC175 - LC180 / LC185

6. Oil / changing oil


Always check the oil level when the engine is placed in a horizontal position.

Always check the oil level visible and to edge of fill hole
See fig. 5.
LC165 - LC170 / LC175 - LC180 / LC185
Change the oil according to the specifications of the machine.
1. Let the engine run 5 minutes, so the engine is hot.
Warm oil liquefies, which makes it easier to drain the oil.
2. Unscrew the drain plug (Fig 5-1) and let the warm oil run out of the engine.
Remember to keep an appropriate container ready.
3. Attach the drain plug and fasten.
Refilling oil (Fig 5-2) (see capacity above)
1. Remove the oil filler cap
2. ( Lower oil filler hole) Add oil to the edge of the filling hole
( Upper oil filler hole) Add oil until the level is between H and L on the dipstick
Important: Before changing oil, ensure that the engine is level position.
Important: By the right amount oil the oil MUST be visible and to edge of the lower fill hole
Please dispose the used engine oil environmentally correct. We suggest that you keep the used oil in a
sealed container and dispose at your recycling center or service station for reclamation. Do not throw it in
FUEL
Use the correct oil for the specific time of year.
SAE 30 or 10W-40
SAE 30 Art.no 90306506

OIL CAPACITY

CHANGING OIL
the waste; pour it on the ground; or down a drain.
3,0 Litre / 4,0 Litre / 5,5 Litre
OIL
0,60 Litre / 0,95 Litre / 1,1 Litre
12