3. Oil / changing oil
- Always check the oil level when the engine is placed in a horizontal position.
- Always check the oil level without fastening the oil stick.
- See fig. 2 pos 1, 2.
Oil should be changed in accordance with the user manual for the machine.
You will need an oil extractor kit. Tex Parts: 40-11336
1. Turn on the engine and let it run for 5 min or until the engine is hot. A hot engine
liquefies the oil which makes it easier to drain.
2. Suck the oil up through the oil filler hole using the syringe that came with the oil
extractor kit. Use the hose to reach the sump.
3. Transfer the used oil to a container.
4. Fill the engine with SAE-30 oil. (TG385: 0.45L)
5. Check the oil level using the dipstick. (Min / Max)
Remember to dispose the used oil so that it does no harm to nature.
4. Fuel
Only use unleaded octane 95 fuel on your engine and the right capacity.
Never overfill the tank with gasoline. Only fill to the lower edge of the filter.
See tank fig 1, pos 5.
Use the correct oil for the specific time of year.
SAE 30 Art.no 90306506
OIL CAPACITY
CHANGING OIL
Note the engine has no drain plug.
Use your local recycling station.
OIL
FUEL
10