Putting On The Headphones; Headphones Button Functions For Music Playback - Silvercrest SBKP 4 A1 Bedienungs- Und Sicherheitshinweise

Press and hold
beeps sound.
The memory in the headphones is cleared. After clearing the
paired memory, it will not automatically connect the device you
used before, need to pair again manually.

Putting on the headphones

The headphones can be adjusted to your head size, if necessary:
the speakers
1
Adjust these to ensure optimal comfort.
Please note the marking "L" (= left) and "R" (= right) on the inside of
the band immediately above the speakers. Put on the headphones so the
control buttons are on the left.
Headphones button functions
for music playback
Start a playlist on your playback device. First turn the volume of
the playback device to minimum, then put on the headphones.
You can adjust the headphones volume with the control buttons.
Music is played back through the speakers
There are 4 control buttons. These control the following functions:
Button Function
– Press and hold to switch the product on / off.
– Press once to play / stop music playback.
– Press once to increase the volume by one level.
One signal tones will sound when the maximum
volume has been reached.
– Press and hold approx. 2 seconds to skip to the next
track.
38 GB/IE
button
2
are secured to the band with a rail for this purpose.
for approx. 3 seconds and two
1
.