Clearing Paired Devices; Connecting The Headphones Through Audio Cable; Putting On The Headphones; Headphones Button Functions For Music Playback - Silvercrest SBKP 1 A2 Bedienungs- Und Sicherheitshinweise

Clearing paired devices

In paired mode (the LED will briefly flash white twice every 3 seconds),
press and hold
The headphones is now in pairing mode. The LED
Simultaneously pressing and holding
approx. 2 seconds and two beeps sound.
The memory in the headphones is cleared and it will not auto-connected to
the previous paired communication device.

Connecting the headphones through audio cable

Insert the 3.5 mm jack plug at one end of audio cable
Insert the 3.5 mm jack plug at other end of audio cable
of your playback device.
The headphone will be auto power off if it has been power on before and
the LED light off.
4
Start a playlist on your playback device. You can only adjust the music
volume on the playback device.

Putting on the headphones

The headphones can be adjusted to your head size, if necessary:
The speakers are secured to the band
2
Adjust these to ensure optimal comfort.
Please follow the marking "L" (= left) and "R" (= right). Put on the headphones
so the control panel

Headphones button functions for music playback

Start a playlist on the playback device and set the volume to the minimum
level to begin with. Choose a comfortable volume after putting on the
button for 2 seconds and acoustic signal sounds.
8
is on the right.
3
flashes red and white.
4
button and
8
to 3.5 mm socket
13
13
with a metal rail for this purpose.
1
button for
6
.
10
to 3.5 mm socket
GB 15