Trademarks; Limitation Of Liability - Kettenbach Identium Heavy Gebrauchsinformation

Disinfection
Impressions can be disinfected using for example a 2% acidic
glutaraldehyde solution. Use disinfection solutions specific for
impression materials. See manufacturer instructions.
Electroplating
Impressions may be silver-plated with an alkaline-plating
solution only.
Model Preparation
Impressions with Identium
ter disinfection of the impression up to several weeks with
high quality dental stone (class III – V). Impressions can also
be poured several times.
Disposal
The empty cartridges / mixing tips / applicator tips and set mate-
rial can be disposed in the household rubbish.

Trademarks

Applyfix 4, Applyfix 5 and Identium
® ®
marks of Kettenbach GmbH & Co. KG.
18
may be poured immediately af-
®
are registered trade-
®
Note
Selected Kettenbach materials are available in certain mar-
kets only.
For professional use only. Caution: Federal (U.S.A.) Law re-
stricts this device to sale by or on the order of a dentist.
If serious incidents occur that are related to the product, ple-
ase immediately contact the manufacturer and the compe-
tent authority.

Limitation of Liability

Except where prohibited by law, Kettenbach GmbH & Co. KG
will not be liable for any loss or damage arising from this prod-
uct, whether direct, indirect, special, incidental or consequen-
tial, regardless of the theory asserted, including warranty, con-
tract, negligence, or strict liability.
The information provided for Kettenbach products is based
on comprehensive research and experience in application
technology. Results are furnished to the best of our knowl-
edge, subject to technical changes within the framework of
product development. However, users must comply with and
consider all recommendations and information in connection
with any use.
Updated: October 6, 2020
37453 5120
/
Identium
®