Herunterladen Inhalt Inhalt Diese Seite drucken

Charging The Battery, Leds; Charging The Battery; Displaying The Charge State; Leds On Battery - Stihl RMA 2 RV Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für RMA 2 RV:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3

6 Charging the Battery, LEDs

► Fully charge the battery, @ 6.1.
► Clean the lawn mower, @ 16.2.
► Check the blade, @ 11.2.
► Fold up the handlebar, @ 7.1.1.
► Set the cutting height, @ 12.2.
► Check the controls, @ 11.1.
► If the 3 LEDs flash red during the check of the controls:
pull out the activation key, remove the battery and
consult a STIHL specialist dealer.
There is a fault in the lawn mower.
► If the steps cannot be performed: do not use the lawn
mower and consult a STIHL specialist dealer.
6 Charging the Battery, LEDs
6.1

Charging the Battery

The charging time depends on several factors, e.g.
temperature of the battery or the ambient temperature. The
actual charging time may differ from the specified charging
time. For specified charging times see
www.stihl.com/charging-times.
► Recharge the battery fully as described in the instruction
manual for the STIHL AL 101, 300, 500 chargers.
6.2

Displaying the Charge State

1
0478-131-9950-A
► Press button (1).
The LEDs illuminate green for approx. 5 seconds to
indicate the charge state.
► If the right LED flashes green: charge the battery.
6.3
The LEDs can show the state of charge or malfunctions. The
LEDs can glow or flash green or red.
The state of charge is indicated when the LEDs glow or flash
green.
► If the LEDs glow or flash red: Troubleshooting, @ 19.1.
There is a malfunction in the mower or battery.

7 Assembling the Lawn Mower

7.1
7.1.1
► Switch the lawn mower off, pull out the activation key and
remove the battery.
► Place the lawn mower on a level surface.
80-100%
60-80%
40-60%
20-40%
0-20%

LEDs on Battery

Folding Up and Folding the Handlebar

Folding Up the Handlebar
English
45

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Rma 2 rpv

Inhaltsverzeichnis