Philips PT927CC Gebrauchsanleitung Seite 37

Fill the cleaning chamber with Jet Clean solution
3
(HQ200) up to the MAX indication.
Note: Make sure the cleaning chamber is always filled above
the MIN indication.
Place the Jet Clean System back onto the cleaning
4
chamber ('click').
Make sure that the release buttons snap back into place.
When the cleaning chamber is filled with Jet Clean
solution, do not move it to prevent leakage.
Put the small plug in the Jet Clean System and put the
5
adapter in the wall socket.
, The shaver holder automatically moves to its highest
position.
The Jet Clean System is now ready for use.
using the Jet Clean system
Place the shaver without protection cap upside down
1
in the shaver holder. Push down the locking lever
completely to lock the shaver into place.
, The battery symbol on the Jet Clean System goes on to
indicate that the shaver is being charged.
Note: The shaver cannot be placed in the Jet Clean System when
the protection cap is on the shaving unit.
Press the on/off button on the Jet Clean System to start
2
the cleaning program.
, The battery symbol on the Jet Clean System goes out.
english
37