Philips PT927CC Gebrauchsanleitung Seite 35

Pull the shaving unit off the shaver.
3
Turn the lock anticlockwise (1) and remove the
4
retaining frame (2).
Remove and clean one shaving head at a time. Each
5
shaving head consists of a cutter and a guard.
Note: Do not clean more than one cutter and guard at a time,
since they are all matching sets. If you accidentally mix up the
cutters and guards, it may take several weeks before optimal
shaving performance is restored.
- Remove the cutter from the shaving guard and clean it
with the brush.
- Clean the inside and outside of the shaving guard
with the brush.
Put the shaving heads back into the shaving unit.
6
english
35