Grundig DKR 2000 Bedienungsanleitung Seite 51

CD­MODE
MP3­Disc
"album" and "file" are very important. "Album"
corresponds to a folder on a PC, "File" to a file
on a PC or a CD-DA track. The device reads MP3
files with a maximum of 255 files per album. An
MP3 CD may not contain more than 512 files or
albums in total.
When burning CD-R and CD-RWs with audio files,
various problems may arise which could lead to
interference in playback. This can be caused by
faulty software or hardware settings or by the CD
being used. Should such problems arise, contact
the customer services of your CD burner or soft-
ware manufacturer or look for relevant informa-
tion, for example on the Internet. When you are
making audio CDs, observe all legal guidelines
and ensure that the copyright of third parties is
not infringed.
MP3­Disc­playback
1
In CD mode, Short press the » « button to slide
the disc tray out from compartment.
2
Insert a MP3 disc into disc tray with its label
side facing upwards.
3
Short press the » « button to slide the disc
tray back into compartment and the CD will be
loaded and reading automatically.
4
After the reading, the CD playback is starting
automatically.
Display: < Folder, Track, Time plays > and <
ID3 information (if available)/Date >.
Playback­and­Stop
1
Short press the »
during playback. Short press the »
again to resume playback.
2 Short press the » « button to stop playback.
Note:­
In CD mode, the kitchen speaker will be
7
switched back to standby mode in 15 min-
utes if the CD function is in disconnected
mode or no operation activity.
­---------------------------------------------------------------------------------------------------------------------------------------
The device is suitable for
CDRs and CD-RWs with
MP3 and WMA file for-
mats.
In MP3 mode, the terms
« button to pause playback
« button
Selecting­files
1
During playback, short press the »
button until the number of the file (track) file you
want to hear and appears in the display.
or
2 On remote control, use the » « / » « button to
do so.
3 The selected track (file) starts playback auto-
matically.
Viewing­playing­file­information­(ID3)
1
During file (track) playback, short press the
»INFO/MENU« or »INFO« button repeated-
ly, on main device or remote control, to view
the playing file's information (if want to).
Note:­
The device support to show ID3 tags/infor-
7
mation:
– File name or No file name if no info.
– Album name or No Album if no info.
– Artist name or No Artist if no info.
– Title name or No title if no info.
– Date or Date flash if not set.
Selecting­folder­(album)­and­file­(track)
The CD function provided Folder up and down
selects function. Folder change function is only
possible on Remote Control.
1 During playback, press the »FOLD « or »FOLD
« button on remote control until the number of
the folder (album) you want to hear and ap-
pears on the display.
2 The first file of selected folder (album) starts
playback automatically.
3 To selects desired file (track), short press the »
« / » « « button repeatedly on remote control
until the desired file (track) you want to hear
and appears on the display. (file information
will be displaying on screen if available)
4 The selected file (track) starts playback auto-
matically.
5 Short press the »AUTO/ « button to end the
playback and you will see the total number of
folders and files (e.g. F20 T240) are showing
on display.
« / » «
ENGLISH
51­ ­