Grundig DKR 2000 Bedienungsanleitung Seite 50

CD­MODE
Deleting­the­track­memory­(To­end­pro-
gram­memory)
1
Press the » « button:
– While in programming.
– Program is in playback.
Repeat­Mode­(Repeating­track)
The CD function provided track's repeat function
(no repeat, repeat one, repeat all and repeat all
random) can be set. Repeat function is only pos-
sible on Remote Control.
1 During playback, short press »REP« button
repeatedly on remote control to select the de-
sired repeat mode;
Repeat­1­(Repeating­track)
1
If repeat 1 selected.
– Display: < symbols = Repeat 1 >.
2 The selected repeat mode starts immediately at
the same time.
Repeat­all­(Repeating­all­tracks)
1
If repeat all selected.
– Display: < symbols = Repeat all >.
2 The selected repeat mode starts immediately at
the same time.
Random­all­(Playing­tracks­in­random­
order)
1 If random selected.
– Display: < symbols = Repeat all >.
2
The selected repeat mode starts immediately at
the same time.
To­end­repeat­mode­(Back­to­in-order­
playing­tracks)
1
To end the repeat mode function, short press
»REP« button repeatedly on remote control un-
til all repeat symbols disappear on display.
2
The playback is back to normal (in-order plays
method) at the same time.
50­ ­ ENGLISH
­---------------------------------------------------------------------------------------------------------------------------------------
Intro­(Playing­tracks­introduc-
tion)
The CD function provided 10 seconds introduc-
tion tracks play. INTRO function is only possible
on Remote Control.
Start­Intro­playback
1 During playback, short press the »INTRO« but-
ton on remote control to start the introduction.
– Display: < INTRO >. (show for 2 second)
2 All tracks will play for 10 seconds each track
by in order.
3
Let device playback until finished or press the
» « button to quit this function.
To­end­the­intro­playback
1
During INTRO playback, short press the
»INTRO« button again on remote control to
end the introduction function.
2
The playback is back to normal from the cur-
rent playing track.
Note:­
The INTRO function is disabled if random
7
function is in using.