Grundig DKR 2000 Bedienungsanleitung Seite 48

CD­MODE
Using­CDs
When burning CD-R and CD-RW with audio
7
files, various problems may arise which could
lead to interference in playback. This can be
caused by faulty software or hardware settings
or by the CD being used. Should such problems
arise, contact the customer services of your CD
burner or software manufacturer or look for rel-
evant information, for example on the Internet.
When you are making audio CDs, observe all
legal guidelines and ensure that the copyright
of third parties is not infringed.
Always keep the CD tray closed to prevent dust
7
from collecting on the laser optics. Do not at-
tach adhesive labels to CDs. Keep the surfaces
of CDs clean. You can play standard 12 cm
CDs on your device. An adapter is not neces-
sary.
CD-DA
Selecting­the­CD­mode­and­playback
1 Short press the »
the mode menu.
– Display: < Mode Select Interface >.
2 Select the CD
» « / » « or rotates the »OK« knob and short
press the »OK« to confirm.
– Display: < CD Interface >.
3
Short press the » « button to slide the disc tray
out from compartment.
Note:­
The » « button control function is disabled if
7
not in CD mode.
4 Insert a CD into disc tray with its label side fac-
ing upwards.
5
Short press the » « button to slide the disc
tray back into compartment and the CD will be
loaded and reading automatically.
48­ ­ ENGLISH
­---------------------------------------------------------------------------------------------------------------------------------------
The device is suitable for
music CDs displaying the
logo shown here (CD-DA)
and for CD-Rs and CD-
RWs with audio data.
/­MODE« button to open
mode icon by
6 After the reading, the CD playback is starting
automatically.
– Display: < Track, Time plays >; < information
(if available)/Date >.
Playback­and­Stop
1
Short press the »
playback. Short press the »
resume playback.
2
Short press the » « button to stop playback.
Play­current­track­from­beginning­(Re-
peating­current­track)
1
During track playback, short press the
» « or » « button the track is repeated from
the beginning.
Selecting­another­track­(Previous/Next)
1
During playback, short press or keep pressing
the » « / »
track you want to hear appears in the display.
or
2 On remote control, use the » « / » « button to
do so.
3. The selected track (file) starts playback auto-
matically.
Fast­Backward/Forward­(Searching­for­
press
a­passage­within­a­track)
1
During playback, long press the »
or » « / » « button until you find the passage
you want to hear.
– Playback starts from selected passage when
you release the button.
« button to pause during
« button again to
« button until the number of the
« / » «