Grundig DKR 2000 Bedienungsanleitung Seite 49

CD­MODE
Program­a­track­memory­and­playback­
a­track­memory
You can create a track memory of up to 20 tracks
for the current CD in any order you choose and
then play them back in that sequence. A track
may be stored more than once. Program is only
possible in the CD stop mode.
1
In CD stop mode,
»PROG/MEM« button to call up the program
function.
– Display: < P1 T01 >. (T01 flashes)
2
Then, select a track (e.g. T03) by short press
the » « / » « or » « / » « button. And then,
short press the »PROG/MEM« button to save
the selected track into program (P01).
– T03 is programmed into P01.
– P02 show up for next program track and
the previous programmed track flashes (e.g.
T03).
– Maximum 20 programs allow saving by in
order (P01-P20).
3 To save more tracks, repeat steps 2 to 3.
4 When the desired program tracks completed,
short press the » « button to confirm.
5
Once confirm, the programs playback be start-
ing automatically with the first programmed
track or file until all programmed tracks play-
back have finished.
– The track memory programs will keep and
show again in display once playback fin-
ished, it can reuse and/or for change if you
want to.
6
Short press the »
the programs if you want to.
or
7
Press the » « button to end the program track
function
­---------------------------------------------------------------------------------------------------------------------------------------
long press
« button to playback again
Adding­tracks­–­Program­track
During track memory keep show in display and
20 programs memory is not fully utilized, and
then you can continue to add the desired tracks
and save them in the remaining program memory.
1
During track memory keep show in display;
– Display: e.g. < P08 T12>. (T12 flashes)
the
2 Which display show P08 ~ P20 are not
programmed, you can select an additional
track by short press the »
» « / » « button. And then short press the
»PROG/MEM« button to save the selected
track into program (P08).
3 Repeat steps 2 to 3 to save more additional
tracks as you desired.
4
Short press the »
confirm.
5
Once confirm, the programs playback be start-
ing automatically.
Note:­
Same track can be stored into different pro-
7
gram number if you want to repeat that track
even more times.
Changing­the­track­selection­–­Program­
track
1 During track memory keep show in display;
– Display: e.g. < P08 T12 >. (T12 flashes)
2
Short press the »PROG/MEM« button repeat-
edly can switch the program's number cyclery
(e.g. from P01 to P08).
3
Then you
those tracks and programs as you de-
sired by short press the »
» « / » « button and short press the
»PROG/MEM« button to do so.
« / »
« button or »OK« knob to
can change or
« / »
ENGLISH
« or
regroups
« or
49­ ­