Introduction; Intended Purpose - Parkside PRRS 15 A2 Originalbetriebsanleitung

Content
Introduction .............................. 19
Intended purpose ....................... 19
General description .................... 20
Extent of the delivery ....................... 20
Functional description ...................... 20
Overview ....................................... 20
Technical specifications ............... 20
Safety information ..................... 20
Initial Operation ......................... 21
Connection without adapter ............. 21
Connection with adapter .................. 21
Operation .................................. 21
Cleaning/Maintenance/Storage .. 22
Waste disposal/
Environmental protection ........... 22
Replacement parts/Accessories .. 22
Guarantee ................................. 22
Service-Center ............................ 23
Importer .................................... 23

Introduction

Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
The operating instructions constitute part of
this product. They contain important infor-
mation on safety, use and disposal.
Before using the product, familiarise your-
self with all of the operating and safety
instructions. Use the product only as de-
scribed and for the applications specified.
Keep this manual safely and in the event
that the product is passed on, hand over
all documents to the third party.

Intended purpose

The pipe cleaning set clears blockages
from pipes, down pipes, drains and toilets.
The device is intended for use with the
PARKSIDE high pressure cleaner
from the series PHD 100*, PHD 110,
PHD 135, PHD 150 and PHD 170 with a
maximum rated pressure of 115 bar.
*Not suitable for Parkside Pressure Washer
PHD 100 manufactured in 2009
(IAN 30018).
The equipment is suitable for the following
pipes:
- Curve C no more than 90°;
- Diameter D at least 40 mm;
- Radius R at least 70 mm.
K = 90°
max
The product is designed only for private
and not commercial use.
The operator or user is responsible for ac-
cidents or damages to other people or their
property.
The manufacturer is not liable for damages
caused by use other than for the intended
purpose or improper operation.
GB MT
D = 40mm
min
= 70mm
R
min
19