Herunterladen Inhalt Inhalt Diese Seite drucken

Electrical Safety; Description Of Device / Spare Parts - ATIKA VT 32 Z-2 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für VT 32 Z-2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
 Be especially careful when changing the operating direction
on a slope.
 Observe the safety distance given by the handle bar.
 Always push the device forward while it is operating. Do not
pull it to yourself or behind you.
 While the motor is running, do not
 lift or carry the device about
 lift the impact guard
 Pay attention that the impact guard is closed or that the
grass catching bag (optional accessory, if applicable) is
attached.
 Turn off the device and wait until the drum has stopped when
 tilting the scarifier
 crossing areas not planted with grass
 transporting the device to and from the work area

Electrical safety

 Design of the connection cable according to IEC 60245 (H
07 RN-F) with a core cross-profile section of at least
-
1.5 mm² for cable lengths up to 25 m
-
2.5 mm
for cable lengths over 25 m
2
 Long and thin connection lines result in a potential drop. The
motor does not reach any longer its maximal power; the
function of the device is reduced.
 Plugs and coupler outlets on connection cables must be
made of rubber, non-rigid PVC or other thermoplastic
material of same mechanical stability or be covered with this
material.
 The connector of the connection cable must be splash-proof.
 When running the connection line observe that it does not
interfere, is not squeezed, bended and the plug connection
does not get wet.
 Wind off completely the cable when using a cable drum.
Do not drive the device across the extension cable.
Make sure that it is behind you in a secure position. Place
the cable on a path or area that has already been thatched.
 Do not use the cable for purposes for which it is not meant.
Protect the cable against heat, oil and sharp edges. Do not
use the cable to pull the plug from the socket.
 Protect yourself against electric shocks. Avoid touching
earthed parts with your body (e.g. pipes, heating apparatus,
cookers, fridges etc.).
 Check the machine and extension cables regularly for signs
of damage or ageing. Replace them if they are damaged.
 Do never connect a damaged cable to the mains. Do not
touch a damaged cable before it is disconnected from the
mains. A damaged cable may cause contact with live parts.
 Do not use any defective connection cables.
 When working outdoors, only use extension cables
especially approved and appropriately labelled for outdoor
use.
 Do not set up any provisional electrical connections.
 Never bypass protective devices or deactivate them.
 Only hook up the machine by means of a fault-current circuit
breaker (30 mA).
The electrical connection or repairs to electrical parts
of the machine must be carried out by a certified
electrician or one of our customer service points.
Local regulations – especially regarding protective
measures – must be observed.
15
Repairs to other parts of the machine must be carried
out by the manufacturer or one of his customer service
points.
Use only original spare parts, accessories and special
accessory parts. Accidents can arise for the user
through the use of other spare parts. The manufacturer
is not liable for any damage or injury resulting from
such action.

Description of device / spare parts

Pos.
Denomination
Handle hoop with switch-connector
2
combination
Switch-plug unit
3
4
Mushroom head screw M6 x 45
Cable bracket
5
Wing nut M6
6
Hoop holder
7
Connecting bar
8
Motor cover
9
Motor complete 1400 W
11
Bearing 6000 Z
14
Belt pulley
15
16
V-Belt 160 J (12 mm /4 Ribs)
Rotary switch for height adjustment
21
Work depth setting left complete
22
Running wheel Ø 175 mm
23
Wheel cover Ø 30mm
24
Seat of bearing
25
25a
Locking lever
25b
Bearing seat cover
Scarifier drum
27
Housing
31
Running wheel Ø 100 mm
32
Spring
37
38
Impact guard
Grass catching bag
39
(optional accessory, if applicable)
Aerator drum
40
(optional accessory, if applicable)
Safety label
41
Screw ST 4.2 x 13
42
Order-no.
380651
390143
380953
380670
380654
380655
380667
380962
380656
380657
380658
380659
380668
380660
380662
361664
361665
380661
380663
380666
380647
380672

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis