Error Code - Fimer TM 236 DUAL PULSE SYNERGIC Bedienungsanleitung

23. ERROR CODE

Below lists the errors that you may encounter and their description:
Codice Description
E 8101
E 8102
E 8103
E 8104
E 8105
E 8106
E 8107
E 8108
E 8109
E 8201
E 8202
E 8203
E 8206
E 8209
E 820c
E 8fa1
E 8fa2
E 8fa3
E 8fb1
W 4700
W 4701
E 9001
E 9002
E 9003
E 9004
E 9005
E 9006
E 9010
Downloaded from www.Manualslib.com
Invalid data buffer
Error while writing data
Invalid CAN index/subindex
Read-only CAN object
Error while reading data
Timeout expired while writing data
Timeout expired while reading data
MMS application not supported
Data connection lost
SD card not present
SD card unformatted
Error while reading data from file
Missing data file
Synergic table missing!
SD update required!
Menu creation aborted
Hyerarchic menu creation aborted
Parameters creation aborted
Wrong configuration
Manual wire loading
Warning which appears when the Feed button is pressed
Gas purge
Warning which appears when the button is pressed purge gas
Antisticking
Warning which appears when the output of the machine is short-circuited, MMA or TIG mode
Inverter overtemperature
Warning which appears when the protection is hardware temperature of the inverter
Power supply error
Warning which appears when the supply voltage exceeds the specified limits or when there are one or
more phases (three-phase machines only)
Thermal overload
Warning which appears when the machine has passed the said duty cycle of Use
Water low pressure
Signaling that appears when the pressure of the coolant is low, due to lack of the same liquid, presence
of air bubbles or air bubbles in the cooling circuit
AC group overtemperature
Warning which appears when the protection is hardware assembly temperature for polarity reversal
Torch trigger pressed, release the torch trigger and / or verify proper operation
Warning which appears when turning on the machine, the trigger is depressed
manuals search engine
E= error W= warning
29