Technical Data; Unpacking; Attachment / Before Starting The Equipment - Scheppach BAP350 Original Bedienungsanleitung

6. Technical data

Dimensions L x
B x H
Mains connection
Power rating
Max. delivery rate
Max. delivery
head
Max. water
temperature
Protection type
Particle size max.
Weight
Subject to technical changes!

7. Unpacking

Open the packaging and remove the de-
vice carefully.
Remove the packaging material as well
as the packaging and transport bracing
(if available). Check that the delivery is
complete.
Check the device and accessory parts for
transport damage. In case of complaints
the dealer must be informed immediate-
ly. Subsequent complaints will not be ac-
cepted.
If possible, store the packaging until the
warranty period has expired. Read the op-
erating manual to make yourself familiar
with the device prior to using it.
Only use original parts for accessories as
well as for wearing and spare parts. Spare
parts are available from your specialized
dealer.
24 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
180 x 165 x 230
mm
230V~ / 50 Hz
350 W
4000 l/h
11 m
35°C
IPX8
1 - 3 mm
3,8 kg
Specify our part numbers as well as the
type and year of construction of the de-
vice in your orders.
m ATTENTION
The device and packaging materials
are not toys! Children must not be al-
lowed to play with plastic bags, film
and small parts! There is a risk of
swallowing and suffocation!
8. Attachment / Before start-
ing the equipment
Mounting the suspension hook
(Fig. 3 + 4)
1. Screw the aluminium tube (D) to the
pump connection.
2. Screw the aluminium tubes (C + D) to-
gether.
Assembly of hose (Fig. 5 + 6)
Attach the hose (B) to the nozzle of the
device and the retaining hook, see illus-
trations.
• Check whether the pressure line has
been attached correctly and the un-
used pump outlet is fully closed.
• Avoid that the pump runs dry.
• Check that the electrical connection is
230V~ / 50Hz
• Check the proper status of the electri-
cal plug socket and make sure that the
plug socket is sufficiently fused (at least
6 A). Insert the pump plug into the plug
socket and the pump is ready for oper-
ation.
• Make sure that moisture or water nev-
er come in contact with the mains con-
nection.