Safety Lock (Child Safety Lock); Signal Tones; Draining; Customised Settings - hanseatic HWMB814B Gebrauchsanleitung

Page EN-20 Additional functions
The cycle will start automatically after the
set start delay period has finished.
If you want to switch off the start time
pre-selection early, press the
ton (8). The appliance will switch off.
Switch it back on and restart the desired
cycle.

Safety lock (child safety lock)

The safety lock allows you to secure the ap-
pliance against unwanted use of the buttons.
The safety lock can be activated only once a
cycle is already running.
Startzeit-
vorwahl
• To activate the safety lock, simultane-
ously hold both 'Extra rinse' (7) and 'Pre-
wash' (10) buttons until the
appears on the display.
The controls are thereby locked and each
time a button is pressed or the cycle selec-
tor is turned, 2 signal tones will sound.
• To deactivate the safety lock again, si-
multaneously hold both 'Extra rinse' and
'Pre-wash' buttons until the
disappears from the display again.

Signal tones

The appliance emits signal tones as stand-
ard, e.g. when a button is pressed, when the
cycle selector is turned, when there is a fault
message or at the end of a cycle.
but-
• To deactivate the signal tones, simultane-
• To activate the signal tones, simultane-

Draining

(7)
If you cancel a cycle while it is running, the
3 Sek. drücken für Individuell
washing will sit in the soapy water or rinse
(8)
Zeit sparen
Ein/Aus
water.
Extra
Spülen
(9)
Vorwäsche wä äs äs
1. If you wish to drain suds out of the appli-
Start/Pause
3 Sek.
Tür Entriegelung
(10)
2. Press the
symbol
3. Select the cycle 'Spin speed' with the
symbol

Customised settings

Your washing machine's cycle selection also
includes a 'Custom' cycle. The 'ECO 40–60'
cycle is configured as standard here. But you
can also store a custom cycle that you have
adjusted and would like to use frequently.
(3)
Startzeit-
vorwahl
Temperatur-
wahl
U/Min U/ /M M
(11)
ously hold down both 'Temperature selec-
tion' (3) and 'RPM' (11) buttons until the
symbol appears on the display.
ously hold down both 'Temperature selec-
tion' (3) and 'RPM' (11) buttons until the
symbol appears on the display.
ance, interrupt the cycle that is running by
pressing the button (8).
The washing machine will switch off.
button (8) again to switch the
washing machine on again.
cycle selector (2) and do not set a spin
speed.
The suds will be drained away.
3 Sek. drücken für Individuell
Zeit sparen
Ein/Aus
Extra
Spülen
Vorwäsche
Start/Pause
3 Sek.
Tür Entriegelung