Schüco IPE 030 CN 05 Kurzanleitung Seite 78

Commissioning
74
5. Select "Single unit" in the selection menu with
Confirm with .
6. Set the date and time.
Select date with . Change the selected number with
the next number with
Confirm the date with
Confirm the time with
NOTE
Please note that time settings should only be made with caution, as they directly af-
fect data logging. For example, if you set the time back by 1 hour, then the existing
data will be overwritten.
7. Setting a password. Select Password with
******** (8 asterisks)
A new password can be set with
Confirm the password with
Your unit is now set up for use on a low voltage grid. The relevant standards ap-
ply!
NOTE
Please note:
Only digits between 0 – 9 and letters between a – z and A – Z are permitted.
The password always has 8 characters. If the password you entered has less than
8 characters, the remaining characters will be filled with "*".
Example:
The password you have chosen is "Solar". This password has 5 characters. The sys-
tem automatically adds three "*", so that the password becomes "Solar***".
8. Completion of commissioning
Confirm overview with
/
/ .
and set the time accordingly.
.
. The default password is:
/ / /
.
.
.
/ and jump to
as an option.
IPE 030 - 033 CN 05