Proper Usage - Vision Fitness T600E Bedienungsanleitung

• Install the POWER CORD (M) to the BASE FRAME (2).
5
• Install the POWER CORD RETAINING PLATE (N) to the BASE FREAME (2)
using 1 SCREW (L) (110V Qty: 2 ; 220V Qty: 1).
ASSEMBLY COMPLETE!
110V
Hardware For Step 5
Description
L Screw
M Power Cord
N Power Cord Retaining Plate
220V
L
L
110V
M
2
8
220V
Hardware For Step 5
Qty Description
2 L Screw
1 M Power Cord
1 N Power Cord Retaining Plate
N

PROPER USAGE

Position your feet on the
belt, bend your arms
slightly and grasp the
heart rate sensors (as
shown). While running,
your feet should be
located in the center
of the belt so that your
hands can swing naturally
Qty
and without contacting
1
the front handlebars.
1
1
Your treadmill is capable
of reaching high speeds.
Always start off using a
slower speed and adjust the speed in small increments to reach a higher
speed level. Never leave the treadmill unattended while it is running.
When not in use turn the on/off switch to off and unplug the power
cord. Make sure to follow the MAINTENANCE schedule in this guide to
maintain optimal performance and prevent premature electronic failure.
Keep your body and head facing forward. Do not attempt to turn around
or look backwards while the treadmill is running. Stop your workout
immediately if you feel pain, faint, dizzy or are short of breath.