Maintenance - Vision Fitness T600E Bedienungsanleitung

MAINTENANCE

Any and all part removal or replacement must be performed by a qualified service technician.
1) DO NOT use any equipment that is damaged and or has worn or broken parts. Use only
replacement parts supplied by your country's local dealer.
2) MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain
important information. If unreadable or missing, contact your dealer for a replacement.
3) MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating
equipment as well as keeping your liability to a minimum. Equipment needs to be
inspected at regular intervals.
4) Ensure that any person(s) making adjustments or performing maintenance or repair of any
kind is qualified to do so. Local dealers will provide service and maintenance training at our
corporate facility upon request.
WARNING!
To remove power from the Treadmill, the power cord must be disconnected from the wall outlet.
RECOMMENDED CLEANING TIPS
Preventative maintenance and daily cleaning will prolong the life and look of your equipment.
1) Use a soft, clean cotton cloth. DO NOT use paper towels to clean surfaces on the treadmill.
Paper towels are abrasive and can damage surfaces.
2) Use a mild soap and damp cloth. DO NOT use ammonia based cleaner or alcohol. This will
cause discoloring of the aluminum and plastics it comes into contact with.
3) Do not pour water or cleaning solutions on any surface. This could cause electrocution.
4) Wipe the console, heart rate grip, handles and side rails after each use.
5) Brush away any wax deposits from the deck and belt area. This is a common occurrence
until the wax is worked into the belt material.
6) Be sure to remove any obstructions from the path of the elevation wheels including power
cords.
For cleaning touch screen displays, use distilled water in an atomizer spray bottle. Spray distilled
water onto soft, clean, dry cloth and wipe display until clean and dry. For very dirty displays,
adding vinegar is recommended.
CAUTION!
Be sure to have proper assistance to install and move the unit in order to avoid injury or
damage to the treadmill.
12
MAINTENANCE SCHEDULE
ACTION
Unplug the unit. Clean entire machine using water and a
mild soap or other approved solution (cleaning agents
should be alcohol and ammonia free).
Inspect the power cord. If the power cord is damaged,
contact Customer Tech Support.
Make sure the power cord is not underneath the unit or in
any other area where it can become pinched or cut during
storage or use.
Unplug the treadmill and remove the motor cover. Check for
debris and clean with a dry cloth or small vacuum nozzle.
WARNING: Do not plug the treadmill in until the motor cover
has been reinstalled.
For touch screen consoles, enter service mode and select
'test'. Select 'touch calibration' and then select 'start'.
Follow the on-screen prompts and touch the screen where
indicated.
Clean IR sensors (located on console masts) with a cotton
swab and rubbing alcohol.
DECK AND BELT REPLACEMENT
One of the most common wear and tear items on a treadmill is the deck and belt
combination. If these two items are not properly maintained they can cause damage
to other components. This product has been provided with the most advanced
maintenance free lubricating system on the market.
WARNING!
Do not run the treadmill while cleaning the belt and deck. This can cause serious
injury and can damage the machine. Maintain the belt and deck by wiping the sides
of the belt and deck with a clean cloth. The user can also wipe under the belt 2 inches
(~51mm) on both sides removing any dust or debris. The deck can be flipped and
reinstalled or replaced by an authorized service technician. Please contact customer
support for more information.
FREQUENCY
DAILY
DAILY
DAILY
MONTHLY
QUARTERLY
QUARTERLY