Service Information - EINHELL 43.405.15 Originalbetriebsanleitung

30 °C. Store the electric tool in its original
packaging.
F or EU countries only
Never place any electric power tools in your
household refuse.
To comply with European Directive 2012/19/EC
concerning old electric and electronic equipment
and its implementation in national laws, old
electric power tools have to be separated from
other waste and disposed of in an environment-
friendly fashion, e.g. by taking to a recycling
depot.
Recycling alternative to the return request: As an
alternative to returning the equipment to the
manufacturer, the owner of the electrical
equipment must make sure that the equipment is
properly disposed of if he no longer wants to
keep the equipment. The old equipment can be
returned to a suitable collection point that will
dispose of the equipment in accordance with the
national recycling and waste disposal
regulations. This does not apply to any

Service information

We have competent service partners in all countries named on the guarantee certifi cate whose
contact details can also be found on the guarantee certifi cate. These partners will help you with all
service requests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category
Wear parts*
Consumables*
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at isc-gmbh.info. Please
ensure that you provide a precise description of the problem and answer the following questions in
all cases:
•
Did the equipment work at all or was it defective from the beginning?
Anl_TC_TS_2225_U_SPK9.indb 38
GB
accessories or aids without electrical
components supplied with the old equipment.
T he reprinting or reproduction by any other
means, in whole or in part, of documentation and
papers accompanying products is permitted only
with the express consent of the iSC GmbH.
S ubject to technical changes
•
The product meets the requirements of EN
61000-3-11 and is subject to special
connection conditions. This means that use
of the product at any freely selectable
connection point is not allowed.
•
Given unfavorable conditions in the power
supply the product can cause the voltage to
fluctuate temporarily.
•
The product is intended solely for use at
connection points that
a) do not exceed a maximum permitted
sup-ply impedance Zsys = 0.25 + j0.25, or
b) have a continuous current-carrying
capaci-ty of the mains of at least 100 A per
phase.
•
As the user, you are required to ensure, in
consultation with your electric power
company if necessary, that the connection
point at which you wish to operate the
product meets one of the two requirements,
a) or b), named above.
- 33 -
Example
V-belt, carbon brushes, table insert, push stick
Saw blade
29.10.2019 11:29:12