Specifications - Makita BHR241 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Red part
1-2. Button
1-3. Battery cartridge
2-1. Switch trigger
3-1. Reversing switch lever
4-1. Lock button
4-2. Rotation with hammering
4-3. Action mode changing knob
5-1. Rotation only
6-1. Hammering only
7-1. Grip base
7-2. Side grip

SPECIFICATIONS

Capacities
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood, metal,
ceramic and plastic.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : chiseling
Vibration emission (a
Downloaded from www.Manualslib.com
Explanation of general view
7-3. Loosen
7-4. Tighten
7-5. Teeth
7-6. Protrusion
8-1. Bit shank
8-2. Bit grease
9-1. Bit
9-2. Chuck cover
10-1. Bit
10-2. Chuck cover
11-1. O symbol
11-2. Action mode changing knob
Model
Concrete
Steel
Wood
-1
No load speed (min )
Blows per minute
Overall length
Net weight
Rated voltage
) : 86 dB(A)
pA
) : 97 dB(A)
WA
Wear ear protection
2
) : 12.5 m/s
h,HD
2
2
) : 9.5 m/s
h,CHeq
manuals search engine
ENE043-1
Uncertainty (K) : 1.5 m/s
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
ENG905-1
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
ENG900-1
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
4
13-1. Depth gauge
14-1. Dust cup
16-1. Blow-out bulb
18-1. Chuck adapter
18-2. Keyless drill chuck
19-1. Sleeve
19-2. Ring
20-1. Limit mark
21-1. Screwdriver
21-2. Brush holder cap
BHR241
20 mm
13 mm
26 mm
0 - 1,100
0 - 4,000
417 mm
3.5 kg
D.C. 18 V
2
2
) : 2.5 m/s or less
h,D
2
ENG901-1