Adjusting Trimmer For User; Adjusting And Setting The Loop Handle - Stihl FSA 60 R Gebrauchsanleitung

8 Adjusting Trimmer for User

► Manually rotate the cap (3) clockwise and tighten it.
Removing the Mowing Head
► Switch off the brushcutter and remove the battery.
► Hold the mowing head with your hand.
► Manually rotate the cap counterclockwise until the mowing
head can be removed.
7.4.2 PolyCut 6-2 mowing head
Mounting the Mowing Head
► Switch off the brushcutter and remove the battery.
1
2
► Position the mowing head (1) on the shaft (2).
► Hold the mowing head (1) with your hand.
► Manually rotate the upper part (3) clockwise and tighten it.
Removing the Mowing Head
► Switch off the brushcutter and remove the battery.
► Hold the mowing head with your hand.
► Manually rotate the upper part counterclockwise until the
mowing head can be removed.
7.4.3 DuroCut 5-2 mowing head:
Mounting the Mowing Head
► Switch off the brushcutter and remove the battery.
0458-832-9821-A
3
1
1
2
3
► Place the thrust plate (2) on the shaft (3) so that its smaller
diameter faces up.
► Position the mowing head (1) on the shaft (3).
► Hold the fanwheel (4) with your hand.
► Manually rotate the mowing head (1) clockwise and
tighten it.
Removing the Mowing Head
► Switch off the brushcutter and remove the battery.
► Hold the fanwheel with your hand.
► Unscrew the mowing head counterclockwise.
► Remove the thrust plate.
8 Adjusting Trimmer for User
8.1

Adjusting and Setting the Loop Handle

The loop handle can be set to different positions to suit the
height and reach of the user.
► Switch off the brushcutter and remove the battery.
English
1
4
47