Operation; Automatic Zero Upon Start-Up - Scale House AWM Serie Bedienungshandbuch

SYMBOL
Indicates that the battery is low (see section 3.2)
Managed for the QUANTITY CHECK BY WEIGHT (see section 6.8).
Indicates that the weight is stable.
GROSS Indicates that the displayed value is a gross weight.
NET
Indicates that the displayed weight is a net weight.
ZERO
Indicates that the weight detected on the weighing system is near zero.
TARE Indicates that a tare is enabled.
AUTO
Indicates that the automatic totalisation function is enabled.
Σ
Indicates that the weight has been totalised.
g
Indicates the unit of measure in use (gram).
pcs Indicates that the number of sampled pieces is being displayed (see section 6.6).
g / pcs Indicates that the average piece weight is being displayed (see section 6.6).
%
Indicates that the weight is displayed in percentile of the sample weight (see section 6.7).
t Indicates the unit of measure in use (tons).
HOLD Not used in this application.
kg Indicates the unit of measure in use (kilogram).
lb Indicates the unit of measure in use (pounds).
OZ Not used in this application.

6. OPERATION

6.1 AUTOMATIC ZERO UPON START-UP

The indicator has an "auto zero at start-up" function: in other words it means that if at start-up a weight within +/- 10%
of the capacity is detected, it will be zeroed; if the weight is not within this tolerance, the display shows "Err 4" and with
a non approved instrument the present weight after a few instants, while with an approved instrument "Err 4" is shown
continuously.
FUNCTION
8