Klarstein Hot Spot Slimcurve Double Wave Handbuch Seite 26

EN
26
Temperature adjustment
• The temperature setting is identical in automatic and manual mode. The default
temperature unit is °C.
• Once the unit is switched on, you can use the Increase (10) and Decrease (1 1)
buttons to set the temperature as soon as the temperature display (15) flashes on the
screen.
• If no button is pressed within 10 seconds of the setting being completed, the unit
automatically saves the settings and exits the menu.
Manual timer setting
1. Press the Auto/Manual button (19) to select manual mode In manual mode (7),
„M" is displayed on the screen.
2. Press the SET button (13) to set the stop time of the unit Select the time using the
Increase (10) and Decrease (1 1) buttons (if the set time is earlier than the current
time, the unit will not turn off at this time until the next day).
3. Press the SET button (13) to set the minute at which the machine should stop (if the
set time is earlier than the current time, the machine will not be turned off until the
next day at that time).
4. Press the OK button (12) to save and exit the menu. The machine will then be
switched off at the time you set.
Automatic timer setting
1. Press the Auto/Manual button (19) to select the automatic mode In automatic mode
(8), „A" is displayed on the screen.
2. Press the SET button (13) to set the operating time of the timer
3. Press the Increase (10) or Decrease (1 1) button to select the day of the week.
4. Press the SET button (13) again to set the first operating timer of the day.
5. Press the Increase (10) or Decrease (1 1) button to set the start time of the heating.
6. Press the SET button (13) again and select the heating stop time with the Increase
(10) or Decrease (1 1) buttons.
7. Press the SET button (13) again to confirm the first heating period The stop time is
shown in the day of the week display (18).
8. Repeat the above steps for the other weekdays (if the set start time corresponds to
the set stop time, the setting is cancelled).