Inhaltsverzeichnis
Werbung
40
85
86
51
87
63
41
88
87
37
46
49
42
38
48
200
39
48
49
04
35
52
89
03
02
30
74
43
75
44
34
45
90
33
43
44
83
45
84
82
62
36
205
56
206
55
45
54
201
08
61
43
The part reference "B135-UC ; B135-UCA" includes the following:
– Basic tool complete with battery and shoulder strap
– Spare battery
– Battery charger
– Plastic carrying case "VAL P9-C"
2. APPLICATION RANGE
2.1)
The tool is supplied with the AU130-C adaptor, which will accept semicircular slotted
dies (common to Cembre 130 kN tooling) suitable for:
– Indentation on copper conductors.
– Circular compression on copper conductors.
– Hexagonal compression on copper, aldrey or aluminium conductors.
2.2)
With the upper adaptor AU130-... and lower adaptor AC130-P, the tool can accept:
– Pre-rounding dies UP130-...
(used for converting aluminium sectoral conductor to a compact, round section).
– Containing dies (MV, MVC, MVM, MUA series) and the relevant indentors PS130-.../E
(to crimp connectors on aluminium cables using the deep indent crimping system).
3. INSTRUCTIONS FOR USE
3.1) Preparation
– The tool can be easily carried using either the handle or the shoulder strap (T) attached
to the rings (R and R1).
– With the tool in the rest position follow the procedure in § 3.6 (for copper cable) or § 3.7
(for aluminium cable):
3.2) Die advancement
Press the operating button (06) to acti-
vate the motor-pump and advance the
lower die. To halt the advancement,
release the operating button (06) and
12
the motor will cut out.
78
65
N
EVER PRESSURIZE THE TOOL
79
WITHOUT INSERTING THE DIES AS THIS
COULD CAUSE DAMAGE TO THE HEAD
77
.
AND THE RAM
4
(Ref. to Figs. 2 and 4)
(Ref. to Figs. 1 - 6)
06
201
FIG. 3
ENGLISH
Werbung
Inhaltsverzeichnis
