Gaggia K111-d Gebrauchsanweisung Seite 31

Cooling the coffee machine
Caution
Steam and hot water can cause burns.
Never aim the steam or hot water flow towards parts
of your body. Do not touch the hot parts of the coffee
machine, i.e. the steam wand. Do Not use the steam
function unless a suitable receptacle has been placed
under the steam wand.
The coffee making function requires a lower
temperature than the steam dispensing and froth
making functions.
If you wish to make a coffee and you have just used
the steam function, you should allow the appliance to
cool down first. However, a short-cut is possible:
• Press the button with the steam symbol (the light in it
should be steady).
The steam button and the espresso button will start
blinking (Fig. 18).
• Place and hold a suitable receptacle under the
steam wand.
Turn the knob slowly anti-clockwise (Fig. 19). The
steam wand will dispense steam first and then hot
water.
• When the coffee selection buttons illuminate steadily
and the steam button light turns out, turn the knob
full clockwise.
Hot water function
This function is convenient to prepare tee and hot beverages.
• Press the ON/OFF button to turn ON the appliance. The coffee selection buttons will
blink. When they stop blinking and light steadily, the appliance will be ready for use.
• Place a suitable receptacle under the steam wand. Slowly rotate the knob anti-
clockwise.(Fig.19). Hot water will flow out of the steam wand.
• Once the desired amount of hot water has been dispensed, stop the function turning the
knob fully clockwise.
Steam button
Espresso
button
Fig. 18
Fig. 19