Spare Parts; Ordering Spare Parts; Recycling; Environmental Information - Nederman FlexPAK 800 Bedienungsanleitung

package is replaced since it is quicker and causes less
EN
spreading of dust.
The work is easy, if the unit is placed so it can be
tilted, see Figure 15
straight up, see Figure 16, with a crane or other lifting
device.
If the filter bags are replaced separately, the plastic
holders will also have to be replaced.
Figure 17, items A–C, shows how the rubber sealing
rings are to be fitted. When a used sealing ring is to be
re-used, the form when open may differ from the ori-
ginal form as shown in item A.
Use a screwdriver to bring the edge of the module
between the rubber lips to obtain the result shown in
item C.
10 Spare Parts
CAUTION! Risk of equipment damage
Use only Nederman original spare parts and ac-
cessories.
Contact your nearest authorized distributor or
Nederman for advice on technical service or
if you require help with spare parts. See also
www.nederman.com.
12 Acronyms and abbreviations
AEB
AUX
BLI
BLI-Wr
CAS
CFDPS-Al
DIR
DIV
DU
EMC
EPROM
FC
FCR
FCV
MFDPS
32
Also, the filter may be lifted
Automatic emptying of bin
Auxiliary
Bin level indicator
Bin Level Warning indicator
Compressed air switch
Control Filter Differential Pressure Sensor Alarm
Duty/idle relay
Duct isolation valve
Data Unit
Electromagnetic compatibility
Electrically erasable programmable read-only memory
Filter cleaning
Filter cleaning relay
Filter cleaning valve
Main Filter Differential Pressure Sensor
FlexPAK 800/1000
10.1 Ordering spare parts
When ordering spare parts always state the following:
• The part number and control number (see the
product identification plate).
• Detail number and name of the spare part (see
www.nederman.com/en/service/spare-part-
search).
• Quantity of the parts required.
11 Recycling
The product has been designed for component mater-
ials to be recycled. Different material types must be
handled according to relevant local regulations. Con-
tact the distributor or Nederman if uncertainties arise
when scrapping the product at the end of its service
life.
11.1 Environmental information
The following environmental information is valid for
FlexPAK 800/1000:
• Cadmium-free and halogen-free relays in the control
equipment.
• Solvent-free washing and lacquer.
• 93.6% recyclable.