The "Child Lock" Function - hanseatic HGS18560DA2I Gebrauchsanleitung

Activating and deactivating the
"Alarm" function
The 'Alarm' function is activated
automatically when the appli-
ance is turned on.
When the door is open for over 2 minutes, the
door alarm will sound. In case of door alarm,
the buzzer will sound 3 times every one min-
ute and will stop alarming automatically after
10 minutes.
lf the freezer temperature is too high due to
power failure or other reasons, there will be a
temperature alarm and the freezer tempera-
– –
ture setting displays " ."
• In case of temperature alarm, press
the"Alarm" button
check the highest freezer temperature.
The temperature value and "Alarm" icon
will simultaneously flash for 5 seconds.
• To save energy, please avoid keeping the
door open for a long time when using the
appliance. The door alarm can also be
cleared by closing the door.
• In order to deactivate the "Alarm" func-
tion, simply press the
a few seconds.
There will be a beep, and the display
will disappear.
for 3 seconds to
button again for
Operation
When power is restored, it is nor-
mal that the temperature alarm
appears, this can be cleared by pressing
"Alarm".

The "Child Lock" function

With the "Child Lock" function, you can pre-
vent children from operating the appliance's
control panel.
Activating the "Child Lock"
function
1. Press the button for roughly 3 sec-
onds to activate the "Child Lock" function.
There will be a beep, and the temperature
display will light up,
2. Press the button again for roughly
3 seconds.
There will be a beep, and "Child Lock" will
appear on the display.
The control panel has now been locked.
Page GB-15