Space requirement
135°
840
1. Check the position of the appliance with a
spirit level.
2. Level out any unevenness on the ground
using both of the front screw feet.
3. Tilt the appliance backwards slightly and
screw/unscrew the screw feet.
4. Repeat the adjustment until the appliance
is upright and secure. The appliance
should not wobble when opening the
doors.
Start-up
Cleaning before use
In order to remove the odour which is pres-
ent in all new appliances, wipe the fridge and
freezer compartment out prior to first use
with a solution made from 100 ml vinegar
and 200 ml water. Then wipe it out with clean
water and dry all of the parts off afterwards.
Electrical connections
• Insert the mains plug into an easily ac-
cessible and properly installed socket
(220–240 V~ / 50 Hz).
You will find all important information
about operation from page EN-12.
Page EN-23