DeVilbiss Compact COM-G510B-16 Betriebsanleitung Seite 2

E
E
Read and follow all instructions and Safety Precautions before using this
The Compact Gravity feed Spraygun Kit complies to ATEX regulations 94/9/EC, protection
level;
Important:
coating materials. The design uses EPA compliant (Devilbiss Trans-Tech®) and HVLP
atomising technology to reduce overspray and improve coating efficiency. These guns are not
designed for use with highly corrosive and/or abrasive materials and if used with such materials
it must be expected that the need for cleaning and/or replacement of parts will be increased. If
there is any doubt regarding the suitability of a specific material contact your local Distributor or
ITW Finishing direct.
Example:
Aircap
Gunbody Finish
B= Blue Anodised
EC Declaration of Conformity
We: ITW Finishing UK, Ringwood Rd, Bournemouth, Dorset, BH11 9LH, UK, as the
manufacturer of the Spraygun model Compact, declare, under our sole responsibility, that the
equipment to which this document relates is in conformity with the following standards or other
normative documents:
protection requirements of Council Directive 98/37/EC relating to Machinery Safety Directive,
and;
Systems intended for use in Potentially Explosive Atmospheres protection level II 2 G X.
This product complies with the requirements of the EPA guidelines, PG6/34,PG6/20 and
PG6/23. Achieving transfer efficiency in excess of 65%.
ITW Finishing Systems and Products reserve the right to modify equipment specification without
prior notice.
© 2005 ITW Finishing Systems and Products
Downloaded from www.Manualslib.com
Operation Manual
COMPACT – Gravity Feed Spraygun
II 2 G X, Suitable for use in Zones 1 and 2
: These Sprayguns are suitable for use with both waterbased and solvent based
Model Part Number
COM-G510B-16
BS EN 292-1 PARTS 1 & 2: 1991, BS EN 1953: 1999; and thereby conform to the
EN 13463-1:2001, council Directive 94/9/EC relating to Equipment and Protective
manuals search engine
Important
equipment
Description
Fluid nozzle size
(16 = 1,6 mm)
2
B. Holt, General Manager
30th June 2003