Right Panel - Silvercrest LT 1510 Bedienungsanleitung Und Serviceinformationen

Connectors and Controls

Right Panel

On the right panel of the TV set there are multiple buttons that let you control the most important
functions even without the remote control. There is also an interface connectors panel offering mul-
tiple ports for the TV antenna and different external AV equipment as well as a slot for inserting a
Common Interface (CI) card.
The following table lists the available connectors and controls:
No. Description
DC input
(5)
Here you connect the round-shaped plug of the power adapter.
(6) HDMI jack
Connector for PC
(7) If you want to use your TV set as a PC monitor you can use a conventional VGA cable (not
supplied) to connect this port to the PC's graphics adapter output.
PC Audio input
If you want to use your TV set as a PC monitor and the PC is connected to the input jack
(8)
(7), you can input the PC audio signal here. Then the sound generated by the PC can be
listened to through the loudspeakers of your TV set.
Component Video input (Y, Pb/Cb, Pr/Cr)
Here you can connect external devices that feature Component Video output connectors
(9)
(for instance a DVD player or other high-end playback equipment, etc.). To do this you'll
need a Component Video cable (not included in the package).
USB port
(10) You may not connect any external USB devices to this port. It is reserved for servicing
purposes only.
SCART input/output
Here you can connect external devices that also feature a SCART connector (for instance
(11)
a VCR, DVD player etc.). To do this you'll need a SCART cable (not included in the pack-
age).
10