Selecting The Signal Source - Silvercrest LT 1510 Bedienungsanleitung Und Serviceinformationen

Country
Language
Delete Program
Search Program
After you have set the above options, press the direction buttons (32) to select "Yes" and press OK
(32). Or select "No" to cancel.

Selecting the Signal Source

1. Press the INPUT button (30) to display the signal source selection menu.
2. Press the direction buttons  or  (32) on the remote control to select the desired signal
source.
3. Press the OK button (32) on the remote control to confirm. The device will switch to the select-
ed signal source.
Select the country where you want to use your TV set, otherwise no chan-
nels may be found.
Select the desired language for the on-screen menu of the TV module.
Determine if you want to delete any already-stored channels when starting
the automatic channel search or if you want to keep them.
Select if you want to perform an automatic channel search or not. If you se-
lect "No", only the location and the language will be updated.
Connecting the Devices
19