Click-Codes - Konig + Neurath LIFE.S Bedienungsanleitung

CLICK CODES
When the control unit is switched on the control unit
uses its relays to inform the user acoustically about the
system state and the reason why the control unit was
switched off before. The table below shows which
number of clicks corresponds to certain information.
Number
of clicks
2x
1x
3x - 6x
52
State information
Normal operation: No Problems detected
Emergency Operation: The system is in
Safe-State, movement is not possible.
Check LED indication and/or error codes on
the display of the handswitch.
Last shutdown incomplete / forced reset:
Check LED indication and/or error codes on
the display of the handswitch.