Compex AYRE Bedienungsanleitung Seite 6

ELECTROMAGNETIC COMPATIBILITY AND FCC COMPLIANCE STATEMENT
1. This product needs special precautions regarding electromagnetic compatibility (EMC) and needs to be
installed and put into service according to the EMC information provided, and this unit can be affected by
portable and mobile radio frequency (RF) communications equipment.
2. Do not use a mobile phone or other devices that emit electromagnetic fields, near the unit. This may result
in incorrect operation of the unit.
3. Caution: This unit has been thoroughly tested and inspected to assure proper performance and operation!
4. Caution: This machine should not be used adjacent to or stacked with other equipment and that if
adjacent or stacked use is necessary, this machine should be observed to verify normal operation in the
configuration in which it will be used.
GUIDANCE AND MANUFACTURER'S DECLARATION – ELECTROMAGNETIC EMISSION
The device is intended for use in the electromagnetic environment specified below. The customer of the user
of the device should assure that it is used in such an environment.
EMISSION TEST
RF emissions
CISPR 11
RF emission
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/ flicker
emissions IEC 61000-3-3
6
COMPLIANCE ELECTROMAGNETIC ENVIRONMENT – GUIDANCE
The device uses RF energy only for its internal function.
Group 1 Therefore, its RF emissions are very low and are not likely
to cause any interference in nearby electronic equipment.
Class B
The device is suitable for use in all establishments,
including domestic establishments and those directly
Class A connected to the public low-voltage power supply
network that supplies buildings used for domestic
purposes.
Complies