Putting On/Taking Off The Helmet; Putting The Helmet On - SCHUBERTH SP1 CARBON Gebrauchsanweisung

PU ear cups assembly
Position the PU ear cup as shown in the
picture by following the position and
orientation indicated on the back of
the PU ear cup.
Make sure that the Velcro on the PU ear cup and the cheek pad
match properly. Small adjustments to the position of the PU ear cups are
possible within its allocation.
D. PUTTING ON/TAKING OFF THE HELMET

1. PUTTING THE HELMET ON

Attention:
See page 12 on how to operate the double-D-ring fastening.
1. Open the chin strap.
2. Grasp the bottom ends of the chin strap and pull these apart.
3. Now starting from the back of the head, pull the helmet on over your head.
4. Secure the chin strap.
5. Pull the free end of the chinstrap tight until it lies firmly but not
uncomfortably tightly under your chin.
6. Ensure that the chinstrap runs under your chin closed to your throat.
7. Check on the correct positioning and length of the chinstrap (see page 12).
8. Do not push the helmet down with extra pressure.
18
Back of the PU ear cups