Chinstrap/Fastener System - SCHUBERTH SP1 CARBON Gebrauchsanweisung

6. CHINSTRAP/FASTENER SYSTEM

The SP1 CARBON features the motor racing
approved double-D-ring fastener. This design allows
the chinstrap length to be adjusted easily and very
precisely every time you put the helmet on.
Releasing and opening
• Pull the red tab of the double-D-ring fastener so that the chinstrap
becomes loose.
• Grasp the metal eyelets and pull these apart.
• Now thread the end of the strap out of the D-ring fastener.
Fastening and tightening
• Thread the free end of the chinstrap through
both of the D-rings then loop it around one
and back through the other as shown in the
images opposite.
• Pull on the free end of the strap until the
chinstrap is tight and positioned closed to the
throat.
• Tuck the free end of the chinstrap away.
Warning:
Never drive before having checked that the chinstrap is properly
fastened, correctly adjusted and positioned. If the chinstrap is
not properly adjusted or fastened, it is possible for the helmet to
come loose from your head in the event of an accident.
Warning:
Never unfasten the chinstrap while driving.
12