Safety Notice For New Paint; Frontal Head Restraints System Safety Notice - SCHUBERTH SP1 CARBON Gebrauchsanweisung

Warning:
Never remove helmet components such as the EPS inner shell,
chinstrap, fixing rivets/screws or other non-removable internal
components.

4. SAFETY NOTICE FOR NEW PAINT

The helmet has been coated with a flame-resistant base layer and paint.
Improper re-painting or the application of additional coats on the helmet
shell can affect the protective ability of the helmet and lead to the voiding
of the FIA and SNELL approvals.
If you paint your helmet, ensure that the inside of the helmet
is protected from spray by carefully masking all openings, as the paint and
fumes can damage the shock-absorbing EPS (polystyrene) components
and plastic parts. Do not dismantle the helmet in order to paint it. Do
not remove any permanent components of the helmet such as the EPS,
chinstrap, fixing rivets or screws or other non-removable inner parts.
Paint droplets that get inside the helmet may impair the performance and
protective elements of the inner parts.
Tip:
For individual painting, use air-drying acrylic or polyurethane paints.
If you have any questions, please contact SCHUBERTH customer
services.
Warning:
Under all circumstances avoid using heat-curing paints.

5. FRONTAL HEAD RESTRAINTS SYSTEM SAFETY NOTICE

This helmet is authorized for use with frontal head restraints system.
23