Simons Voss Technologies RouterNode 2 Kurzanleitung Seite 40

9. Reset
Reset system
configuration
40 / 164
Make a distinction between them:
Reset system configuration: Reset all system

settings (3060 or SmartIntego or MobileKey).
Reset network configuration: Reset all network

settings (IP address, DHCP settings, host name).
NOTE
IP address recovery
If the IP address is assigned by a DHCP server (default
setting), the DHCP server assigns the IP address again
directly after resetting.
1. Disconnect the power supply (round plug or net-
work cable for PoE).
2. Wait 20 seconds.
3. Press and hold the reset button.
4. Reconnect the power supply (round plug or net-
work cable for PoE).
5. Release the reset button after one second.
Device flashes green again (see
9
[ 39]
).
}
9 System configuration is reset.
RouterNode 2, GatewayNode 2,
SmartBridge
Signalling
EN