Troubleshooting - Gaggenau AC2001.1 Gebrauchs- Und Montageanleitung

en Troubleshooting
Remove the odour filter.
2.
Installing the odour filter for the CleanAir
circulating-air module
Remove the new odour filter from the packaging.
1.
9 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
If the appliance is defective, call Customer Service.
▶
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
9.2 Malfunctions
Fault
The appliance is not working.
The lighting does not work.
lights up permanently.
24
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker is faulty.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your kitchen or other appliances are working.
▶
The LED lamp is defective.
Call the after-sales service.
▶
Defective LED lights may be replaced by the manufacturer, their customer
▶
service or a qualified technician (electrician) only.
The grease filters are saturated.
Clean the grease filters. → Page 23
▶
Insert the new odour filter into the circulating-air
2.
module.
Fit the panel such that it is held firmly in place by
3.
the magnets.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
Only use genuine spare parts when repairing the
▶
appliance.
If the power cord of this appliance is damaged, it
▶
must be replaced by trained specialist staff.
9.1 Replacing defective LED lights
Defective LED lights may be replaced by the manu-
▶
facturer, their customer service or a qualified techni-
cian (electrician) only.