Operating Temperature; Description; Report Leds - Desoutter EAP-Tflex Bedienerhandbuch

DESCRIPTION AND OPERATION
We recommend a programme of health surveillance to detect early symptoms which may relate to noise or vibration exposure,
so that management procedures can be modified to help prevent future impairment.
Ø53
(2.08")
Models Torque
(Nm)
min max 115VAC 230VAC mm
EAP2-30-* 6 30
EAP2-65-* 15 65
* = TF1 for TFlex 115 VAC, TF2 for TFlex 230 VAC

3 - OPERATING TEMPERATURE

Considering its technology, the temperature of the tool naturally increases during tightening cycles. Best tightening rates are
reached with an ambient temperature of 20°C. The performance of the tool is decreased by approximately 50% for an ambient
temperature of 40°C. The maximum operating temperature is 45°C.
For further information, refer to "Max duty cycle" file on documentation CD-ROM.

4 - DESCRIPTION

4.1 - Report LEDs

The operator is informed at a glance of the tightening results through report LEDs. They can have three colours (green, yellow and
red) and are located on the upper part of the tool and on both sides of the tool. They are off during the tightening and turn on after
the tightening.
EAP-TFlex tools
Maximum speed A
(rpm)
660 1016 28 1.103 27
330 507 40 1.576 30.5 1.202 57.5
Report LEDs
Ø68 Ø46
(2.68") (1.81")
L
B H
" mm " mm
1.064 45.5
Trigger
Part no
Issue no
Language English
Date
Page
Ø47
ØB
(1.85")
3/8"
ØA
L Output
" mm "
1.793 559.5 22.044 Ø 3/8" 2.0
2.266 581.5 22.911 Ø 3/8" 2.2
Operator
interface
Run Reverse button
Push/Pull detachable
mains power cord
6159932890
02
01/2010
166
7 /
H
12
Weight
kg lb
4.40
4.84