Operating Temperature; Description; Report Leds - Desoutter EAP Bedienungsanleitung

Part no 6159936431
Issue no 06
Language English
Date 09/2009
24
Page 6 /
Ø53
(2.08")
230VAC model
EDP1.5-15-*
EDP2-24-*
EDP2-33-*
EDP2-43-*
* = T for "Standard", TA for "Advance"

1.3 - Operating temperature

Considering its technology, the temperature of the tool naturally increases during tightening cycles. Best tightening rates are
reached with an ambient temperature of 20°C. The performance of the tool is decreased by approximately 50% for an ambient
temperature of 40°C. The maximum operating temperature is 45°C.
For further information, refer to "Max duty cycle" file on documentation CD-ROM.

1.4 - Description

1.4.1 - Report LEDs

The operator is informed at a glance of the tightening results through report LEDs. They can have three colours (green, yellow and
red) and are located on the upper part of the tool and on both sides of the tool. They are off during the tightening and turn on after
the tightening.
(2.68")
Torque (Nm) Maximum speed
(rpm)
min max 115VAC 230VAC
3 15 567
5 24 900
6 33 658
8 43 510
Report LEDs
EAP/EDP
Ø68 Ø46
(1.81")
Ø47
(1.85")
L
L
mm
1012 491.5 19.3651
1385 516.5 20.3501
1012 508.5 20.0349
784 508.5 20.0349
Trigger
Push/Pull detachable mains power cord
Ø34
Ø34
Ø60
(1.34")
(1.34")
(2.36")
Ø3/8"
12 20
Output
"
Hex 1/4" F 1.7
Hex 1/4" F 1.8
Ø 3/8" 1.85
Ø 3/8" 1.85
Operator interface
Run Reverse button
Hex. 1/4" F
Weight
kg lb
3.74
3.96
4.07
4.07