Cleaning And Care - Klarstein Quickstick smart Bedienungsanleitung

Troubleshooting connection problems
If your Klarstein device cannot be found in the WLAN, check the following:
• Is the device plugged in?
• Is the WiFi feature of my phone enabled?
• Is the WiFi function of the Klarstein device activated? (Follow the instructions in the
app)
• Has the WLAN password been entered correctly?
• Are the router, Klarstein device and smartphone in the immediate vicinity during the
connection attempt? (Ideally no more than 5 m apart)
• If you have deactivated the 2.4 GHz band in the settings of your wireless router,
activate it in your router settings.
Note: For further help, follow the instructions in the app when setting up the
connection.

CLEANING AND CARE

1. Turn the pump housing clockwise to detach it from the motor housing and then
remove it.
2. Turn the pump cover clockwise to release it from the pump housing and then remove
it.
3. Clean the pump casing and pump cover in the dishwasher or sink.
4. Use detergent and a soft toothbrush to clean the heating coil, pump shaft and
sensor, then rinse under running water.
5. Allow all parts to dry completely before reassembly.
Note: Make sure that only the metal parts are exposed to the water. Do not expose
the upper part of the sous-vide stick (motor housing) to water.
EN
21