Connections - MC Crypt MIDI-7 Bedienungsanleitung

6. Operating Elements
56. "MASTER" output
The master cinch output.
57. "REC" output
The cinch output for recording.
58. "PHONO 1 / LINE 1" selection switch
If you are connecting a turntable as an input, switch it to "PHONO". If you are connecting to other audio devices, switch it to LINE.
59. Grounding screw for "PHONO 1"
The grounding screw is designed for connecting the earth of the connected turntable. Note that this is not a safety earth.
60. "LINE 1 / PHONO 1" cinch input socket
The socket is for connecting the audio input with a cinch cable (not included).
61. "LINE 2 / PHONO 2" cinch input socket
If you are connecting a turntable as an input, switch it to "PHONO". If you are connecting to other audio devices, switch it to LINE.
62. "PHONO 2 / LINE 2" selection switch
The socket is for connecting the audio input with a cinch cable (not included).
63. Grounding screw for "PHONO 2"
The grounding screw is designed for connecting the earth of the connected turntable. Note that this is not a safety earth.

7. Connections

Power up the mixer
The mixer can be powered up by an external 5 V/DC power source (not included) or by a USB power source.
Note that if you are using the mixer with a computer software. You must connect the computer to the mixer with the USB cable.
Connecting to an external 5 V/DC power source
Connect the 5 V/DC power source to the DJ controller 5 V/DC socket (54).
Connecting to a USB power source
Connect the USB type B plug to the DJ controller USB Type B socket (52). Connect the other end of the cable with the USB type A plug, to a
USB power source / a vacant port on your computer.
26