Herunterladen Inhalt Inhalt Diese Seite drucken

MC Crypt MIDI-7 Bedienungsanleitung Seite 28

Dj-controller
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

6. Operating Elements
40. Effect Parameter 1 adjustment knob
Adjust the first parameter (if any) of the selected effect.
41. Booth volume adjustment knob "BOOTH VOLUME"
Control the booth output signal volume. Turn it clockwise to increase the volume, turn it anti-clockwise to reduce the volume.
42. 6.3 mm midi microphone input jack
Input jack for connecting DJ microphones via a 6.3 mm plug.
43. XLR midi microphone input jack
Input jack for connecting DJ microphones via a XLR plug.
44. "MIC VOLUME"
Control the microphone input volume. Turn it clockwise to increase the volume, turn it anti-clockwise to reduce the volume.
45. Cross Fader curve volume control "X-FADER SLOPE"
Turn in an anti-clockwise direction for a smooth cross fade. Turn it in a clockwise direction for a sharp cross fade.
46. PFL fader
The PFL fader is used to cross-fade the PFL output between the channels CH1 and CH2, i.e. one channel is faded out (becomes quieter) while
the other channel is faded in (becomes louder).
When the cross fader is in the middle position, channels CH1 and CH2 are played at the same volume.
Turn the fader in an anti-clockwise direction (towards CUE 1) to fade into CH1; turn the fader in a clockwise direction (towards CUE 2) to fade
into CH2.
47. PFL volume control "HEADPHONE VOLUME"
Control the PFL output volume. Turn it clockwise to increase the volume, turn it anti-clockwise to reduce the volume.
48. 3.5 mm headphone jack "HEADPHONE 2"
Insert a 3.5 mm headphone for pre-fade listening.
49. 6.3 mm headphone jack "HEADPHONE 1"
Insert a 6.3 mm headphone for pre-fade listening.
50. Master balanced XLR output R
51. Master balanced XLR output L
The master balanced XLR output. (L for left channel and R for right channel)
52. USB Type B socket
53. Power switch
You may select the USB as the power source or use an external 5 V power source (not included).
54. 5 V/DC socket
Allows you to power the DJ controller via an external 5 V power source (not included).
55. "BOOTH" output
The secondary cinch output.
25

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

31 21 71

Inhaltsverzeichnis