Basic operations
3.12.2
To select a target device to be removed from the scan list, complete one of the
following steps:
•
•
•
•
Click OK.
3.12.3
Click Commands. The Commands window opens.
Figure 26: Commands window
Select Scan Enable in the Commands window. Scanning will begin immediately.
Click X to close the commands window.
40
Downloaded from
www.Manualslib.com
Removing a target device from the scan list
In the Scan window, clear the check box next to the target device to be
removed.
-or-
Double-click on the target device name or port.
-or-
Press Shift + Delete to remove the selected target device and all entries below
it.
-or-
Click the Clear button to remove all target devices from the scan list.
Starting the scan mode
manuals search engine
590-591-609B